Adhesives & Finishes
Answers to common questions about glues, adhesives, and epoxy finish
Which adhesive should I use for rod building?
There are several that will work well. Any of the liquid 2-part slow cure epoxies are excellent for all around rod building chores. Gel-type epoxies such as Rod Bond and Kardol also work well and do not run or drip out of assembled joints. 5-minute t
Why isn't my epoxy finish curing? It's still tacky after several days.
An epoxy finish that will not cure even after several days at normal room temperature is not likely going to cure, ever. The most common culprit behind a tacky finish is improper measuring or mixing of the resin and hardener.It is critical to measure
Should I thin my finish?
Generally there is no need to do so, however many rod builders find it easier to work with a less viscous finish for easier application, especially when working in a cooler climate, like a garage or workshop. This can be accomplished by slightly warm
How do I get rid of bubbles in my finish?
The best way is to keep from creating them in the first place. Mix your epoxy slowly but thoroughly. Keep brushing to a minimum or even consider using a hard surface tool such as a spatula for applying your finish. The epoxy mixing tool helps make mi