Shop Mud Hole

Rod building classes

Mud Hole Custom Tackle

<p>Locate the spine for each section individually. Mark each piece accordingly and assembly the rod aligning each spine mark. The ferrule overlap may result in a slight change in overall spine effect. Since you are going to be fishing the rod fully assembled, adjust for any slight deviation and remark the sections as needed.</p>

Locate the spine for each section individually. Mark each piece accordingly and assembly the rod aligning each spine mark. The ferrule overlap may result in a slight change in overall spine effect. Since you are going to be fishing the rod fully asse

How do I find the spine on a multi-piece rod?

Rod Blanks

Spining Rod Blanks

Which adhesive should I use for rod building?

Why isn't my epoxy finish curing? It's still tacky after several days.

Should I thin my finish?

How do I get rid of bubbles in my finish?

Adhesives & Finishes

How many guides should I use?

How tightly should my guides be wrapped?

Is it possible to slow down a rod's action by adding more guides?

Will double-footed guides make a rod stiffer?

How do I space my guides?

Guides

How do I size tip-tops?

How do I size guides?

Sizing Parts

How do I locate the spine of the blank?

How do I spine the short, stiff butt sections of my multi-piece rods?

Where should I locate the spine on my rod blank in relation to the guides?

Do I need to wrap my rod's ferrules?

Rod Building

How can I remove a guide from my rod?

Rod Repairs

How do I find the spine on a multi-piece rod?Updated 3 years ago